Back to previous page
Search for similar:  Manufacturer OR Model
Neumann   RSM 191 Stereo Microphone System - Image #1
Neumann   RSM 191 Stereo Microphone System - Image #2
Neumann   RSM 191 Stereo Microphone System - Image #3
Neumann   RSM 191 Stereo Microphone System - Image #4
Neumann   RSM 191 Stereo Microphone System - Image #5
Neumann   RSM 191 Stereo Microphone System - Image #6

This Advertisement has Expired

Neumann RSM 191 Stereo Microphone System

Stereo Microphone System

Price: £1,950.00
Location: United Kingdom
Condition: Used
Viewed: 299 times
Date Expires: 10/06/2017
Item ID: 180293

Stereo Microphone System

Neumann RSM 191 Stereo Microphone System

For people in the business this microphone needs no introduction. It is in full working order and comes exactly like the photos illustrate. However i have included the official product description below;
The RSM 191 is a stereo microphone system consisting of the microphone and the MTX 191 A matrix amplifier. It has an adjustable pick-up angle and high directivity. The microphone has two separate capsule systems, a hypercardioid element and a figure-8, both in a short shotgun. Together they generate the mid and the side signals. 

The matrix amplifier controls the width of the stereo image by changing the gain of the side signal relative to the middle signal in six 3 dB steps. The output signals of the matrix amplifier are either mid-side (MS) or left/right (XY). The signals are converted through transformerless sum-and-difference circuitry. 

The balanced, transformerless technology permits the use of long cables between the microphone, the matrix amplifier and the following mic input of other signal processing equipment.
The RSM 191 system is an ideal microphone system for: 

Outdoor stereophonic news coverage, even in extremely noisy surroundings; 

Stereo recordings for film and television where the actors are recorded simultaneously with acoustic ambiance, or an orchestra; 

Stereophonic motion picture sound where the width of the sound image must match the camera viewing angle.
The RSM 191 consists of a capsule head containing two separate transducer systems and an amplifier section with two independent transformerless microphone amplifiers. 

An interference tube system with a hypercardioid characteristic generates the middle signal, while a horizontal figure-8 assembly provides the side signal.
Acoustic features
The RSM 191 achieves its high directivity and special acoustic features through a unique construction. The microphone capsule assembly is mounted inside a housing tube that is acoustically open but has a high flow resistance. 

This results in a high driving force for the diaphragm, even with a low pressure gradient factor of the capsule. Therefore, the microphone can suppress unwanted off-axis interference to a considerably higher degree than other microphones without such an interference tube. 

The middle system (M-signal) combines high attenuation of lateral sound incidence, similar to a hypercardioid characteristic (which is about 10 dB), with the large front-to back ratio of the super-cardioid characteristic. 

Therefore, sound from the rear is likewise attenuated by approximately 10 dB. This design approach makes the microphone less sensitive to wind or pop noise than other shotgun microphones. 

The side system (S-signal) consists of two single capsules arranged back to back, closely behind the interference tube (M-signal) capsule. Arrows engraved on the microphone housing show their orientation. 

The uniform and balanced performance characteristic of the microphone system is achieved without resorting to corrective resonance effects. Therefore, the microphone maintains an excellent impulse response, reproducing all transient phenomena in music and speech without coloration. The entire internal construction is decoupled from the housing to avoid structure borne and handling noise.
Electrical features
The output signals of the included matrix amplifier are in either MS or XY format. The small capsules are mounted in close proximity to ensure transparent and coloration-free stereo sound with excellent mono-compatibility. The stereo acceptance angle is variable and controlled remotely.
Filter and attenuation
For the handling of very high sound pressure levels, a 10 dB attenuation can be switched ON to avoid overloading of the following equipment. To suppress structure borne noise, a high-pass filter in the matrix box provides cutoff frequencies of 40 Hz, 80 Hz, and 200 Hz.
Battery supply
The RSM 191 system is fed from either 2 x P 48 phantom power or from a 9 V battery inside the matrix box. One alkaline battery provides 8 hours of operation.
Delivery range
The complete miocrophone system comes in a robust aluminum carrying case. 

Along with the microphone and the matrix amplifier the case contains a windscreen, the special interconnecting cable and an adapter cable that splits the 5-pin XLR output of the matrix amplifier into two 3-pin XLR connectors for channels I and II to connect with the following equipment.


Similar products
Canon EMO E325 Microphone Splitter
ob van for sale Mercedes Atego HD Rigid Obvan 7 cameras - coach built for 10 cam
SONY ECM-673 Shotgun Microphone
Audio-Technica AT871R Audio-Technica AT871R UniPlate Omnidirectional Condenser Boundary Microphone
Scion Pro-1008 Scion Pro-1008 8x8 TV Distribution Matrix - Video Stereo Audio Over CAT5 Switch

More products from this category
Shotgun Microphone
Shotgun Microphone
Sennheiser ME67 and Foam Pad
Sennheiser ME67 and Foam Pad
Revolabs Solo Executive Wireless Microphones+Base Station Audio Video Conference
Revolabs Solo Executive Wireless Microph.
Handheld Microphone
Handheld Microphone
Microphone Adapter for C300 Mark II Camera
Microphone Adapter for C300 Mark II Came.
Audio-Technica AT871R UniPlate Omnidirectional Condenser Boundary Microphone
Audio-Technica AT871R UniPlate Omnidirec.
See More Kit