Back to previous page
Search for similar:  Manufacturer OR Model
DV fluid heads - No image

This Advertisement has Expired

DV fluid heads

DV fluid heads

Price: Make Offer
Location: United Kingdom
Condition: New
Viewed: 948 times
Date Expires: 01/03/2011
Item ID: 120666
 

DV fluid heads

DV fluid heads

 

DV 10 SB

 

SPEEDBALANCE

 

The new DV 10 SB fluid head is Sachtlers smallest 100mm solution. It provides a 12-step counterbalance as well as five horizontal and five vertical grades of drag (+0). The Speed balance technology enables fast and smooth adjustments, while the heads payload range from 1 to 12 kg (2-26 lbs) and tilt range of +90° to -75° make the DV 10 SB the ideal tool for diverse shooting conditions. The fluid head is equipped with a compartment for spare camera screws (pin, 1/4, 3/8), sparing the operator from tedious searching on the set.
The DV 10 SB operates with a DV 100 pan bar. Other useful features include the integrated flat base fitting and a self-illuminating Touch Bubble.

The fluid head DV 10 SB is delivered with the Touch & Go® plate 16 (Code No. 1064). It comes with a 1/4 screw and 3/8 screw. Spare camera screws (1/4/ 3/8) and a pin screw are stored in the balance plate. The pin screw fits in the centre hole of the camera plate. Thus a pin/1/4 screw connection can be achieved if your camera requires this connection.
If your camera remains front- or back heavy after going through the necessary centring procedure you may solve this by using the C.O.G plate (Code No. 1063). This plate offers a removed position. The C.O.G. plate can be mounted to either the front or the back. It cannot be operated with pin and 1/4 screw.

 

DV 12 SB

 

The key to Sachtlers successful fluid heads is their step switching. Now our innovative SPEEDBALANCE technology enables even faster and finer counterbalance of your camera system. By reducing the minimum payload, the heads overall payload range is increased.

The fluid head DV 12 SB is delivered with the Touch & Go® plate 16 (Code No. 1064). It comes with a 1/4 screw and 3/8 screw. Spare camera screws (1/4/ 3/8) and a pin screw are stored in the balance plate. The pin screw fits in the centre hole of the camera plate. Thus a pin/1/4 screw connection can be achieved if your camera requires this connection.
If your camera remains front- or back heavy after going through the necessary centring procedure you may solve this by using the C.O.G plate (Code No. 1063). This plate offers a removed position. The C.O.G. plate can be mounted to either the front or the back. It cannot be operated with pin and 1/4 screw.

 

Model

DV 10 SB

DV 12 SB

Weight

2.6kg/5.7lbs

2.7kg/6lbs

Payload

1 12kg/2.2 26.5lbs

1 14kg/2.2 31lbs

Sliding range plate

60mm/2.4in

70mm/2.8in

Counterbalance

In 12 steps

In 12 steps

Grades of drag

5 each horizontal and vertical + 0

5 each horizontal and vertical + 0

Tilt range

+90°/ -75°

+ 90°/ -75°

Temperature range

-40°/+60°

-40° to +60°/ -40° to +140°F

Camera fitting

Touch & Go Plate S

Touch & Go Plate 16

Tripod/Pedestal fitting

100mm bowl, integrated base fitting

100mm bowl, integrated flat base fitting

Pan bar(s)

1, Type DV 100

1, Type DV 100

Level

Self-illuminating Touch Bubble

Self-illuminating Touch Bubble

Batteries Level

1 x CR2032

3 x 625U or LR9


DV 12 SB manual (236,75 KB)
DV 12 SB data sheet (182,38 KB)
DV 10 SB Data sheet (88,12 KB)
DV 10 SD Manual (295,01 KB)

Share:

Similar products
OCONNOR 2060HD (used_1) Used O’Connor 2060HD (used_1) – Tripod Head – PAN AND TILT HEADS
OConnor 2575D Ultimate Fluid head package
VINTEN VECTOR 700 (used_2) Used Vinten VECTOR 700 (used_1) – PAN AND TILTS HEADS
Ikegami Ikegami CA 390 camera adaptor Ikegami studio professional camera adaptor for use with Ikegami camera heads, to output component or CCU signals.
OCONNOR 2575B (used_1) Used O’Connor 2575B (used_1) – PAN AND TILT HEADS
MANFROTTO 560B-1 Fluid Video Monopod with Head
CARTONI OMEGA (used_1) Used Cartoni OMEGA (used_1) – PAN AND TILT HEADS

More products from this seller