Back to previous page
Search for similar:  Manufacturer OR Model
Skaarhoj SKAWIFI-B4 - Image #1

This Advertisement has Expired

Skaarhoj SKAWIFI-B4

WIFI-B4 Link

Price: £600.00
Location: United Kingdom
Condition: New
Viewed: 149 times
Date Expires: 25/06/2020
Item ID: 213000
 

WIFI-B4 Link

Skaarhoj SKAWIFI-B4

Get full wireless control for your live multi camera production. The URSA Mini (+Pro) and the Studio Camera Series from Blackmagic Design offers great remote control setting such as iris, focus and zoom (on supported lenses) together with full DaVinci primary color corrector. The WIFI-B4 Link allows you to do all these great things wirelessly - no more cables! _x000D_ _x000D_ Receives control signals either via WiFi or incoming SDI_x000D_ CCU control your Blackmagic Camera wirelessly (WiFi)_x000D_ Control iris on analog B4 lens via SDI or WiFi_x000D_ Hirose 12-pin connector_x000D_ Preview/program tally on small LED_x000D_ GPI Output for external tally lamp_x000D_ Iris lens calibration feature_x000D_ Compatible with Studio Camera series and URSA Mini (+Pro)_x000D_ Dimensions: 9.5 x 7.5 x 3 cm_x000D_ Weight: 0.175 kg_x000D_ _x000D_ The camera selector switch determines the camera ID for the Hirose connector only and not the camera ID on the SDI out. This is set on the main controller (see Controlling the WIFI-B4 Link section). The camera ID is set for any case with selection from 1-9. If the selector is set in positions A-F special functions are activated instead. You can change the switch selector using a small screw driver. Notice you B4 Lens may need to be set up for external control with a switch._x000D_ Selector switch 0 = Deactivated_x000D_ Selector switch 1-9 = Camera 1-9_x000D_ Selector switch A = Creates momentary access point to set up the network parameters_x000D_ Selector switch B = Deactivated_x000D_ Selector switch C = Deactivated_x000D_ Selector switch D = Runs test program where the lens iris will close and open in a cycle that will prove that it works _x000D_ Selector switch E = Reset calibration _x000D_ Selector switch F = Calibration mode (will determine when iris is fully closed/open and save settings, given the factory default values, are not appropriate for your particular lens_x000D_ _x000D_ In order to control the WIFI-B4 Link you need a UniSketch OS based SKAARHOJ controller with the Device Core "BMDCamCtrl" installed. The IP settings for the device core must correspond with the IP address you have set for the WIFI-B4 Link. Remember the IP address for the WIFI-B4 Link and the main controller used for sending commands must not be the same!_x000D_ For sending a command to the WIFI-B4 Link you assign a hardware interface component (such as a joystick) to a BMDCamCtrl action on the main controller._x000D_

Check out the Lens Coverage & Camera Comparison Tool from CVP

Share:

Advertiser's Terms And Conditions

See Terms And Conditions

Similar products
No Similar Products found

More products from this seller