Automation in Uncertain Times


In light of the unfavourable economic outlook broadcasters need to protect their investment in technology like never before. There is a high chance that some products designed to make the broadcast environment more efficient will become obsolete and this in turn will have a knock-on and negative effect on workflow in transmission suite. Although broadcasters will continue to used these ‘end of life-ed’ solutions they will not be supported by the original manufacturer and this will give rise to issues when it comes to play-out automation and the ability of a broadcaster’s system to interface easily with new and replacement solutions.
Over the years, conventional broadcast automation has been developed around device control. However, this leads to issues due to its interdependence on certain devices if they do not continue to be supported. Device specific automation does not provide the flexibility to radically evolve as broadcasting changes but results in a more revolutionary process that tends to result in a new product being developed completely separate from what has been sold before forcing the customers to replace the automation system.
There is an increasing need therefore, to select a flexible, future proofed, software based automation architecture that is not interdependent on the device it needs to control or the interface. The ideal automation system is one which has been developed based on generic workflow principals rather than being device specific.
The ideal automation system is one that has evolved in modular fashion so that when a component becomes obsolete this does not result in an end of life notice for the automation system itself. As an example when the processor card was becoming more difficult to source then Abit took a decision that the valuable software should be ported across to a different platform. However to ensure support for customers using both the old and new systems the baseline software is maintained in such a way that it can be compiled to work on both platforms keeping one baseline of software and hence one development team.
Broadcast Automation in its truest sense therefore, should be all about the automation of media workflow within the broadcasters organisation. The development of the software should be based on a hierarchically structured modular design and thus be as close to platform-independent as possible to allow easy porting to other processing platforms.. The higher layer supports the overall workflow concept, the middle layer provides support for logical devices associated with each functional unit used by the broadcaster and the lower layer handles the protocol and hardware interfacing.
These can either be soft or hard linked and even better if the top two layers are linked through a heavily optimised database as in the Abit system. This provides a fast gateway between the automation system and other equipment including the operator workstations, scheduling system, media archive and ingest paths.
In this way, the logical software can easily be modified to handle the changes without altering the upper level supporting the overall workflow and the lower level protocol and hardware interfacing if a device is upgraded with slightly different functionality or characteristics.
If a new device replaces the end of life device then a new logical device can be developed easily based on a standard structure resulting in no change to the rest of the software. Additionally the model allows the number of logical devices to grow or shrink without affecting the overall structure of the automation system.
The logical device stores information about the workflow within the device, the local media storage and the communication method that could use the Device API, Device Protocol, FTP or SQL dependant on the device capabilities. The logical device is mapped to the actual device using the physical communication links such as Ethernet, Fibre Channel, Serial communication lines or hard wired signals at the lowest layer of the hierarchical model.
As a result an automation architecture developed in this way provides a long term solution and one which will avoid issues with disrupted workflow if interfaced products become obsolete and equally importantly provides the flexibility to allow the overall workflow to be altered easily providing a future-proof platform. Certainly, a valid consideration in these uncertain economic times.

Tags: Abit | iss032 | automation | Device API | Device Protocol | FTP | SQL | N/A
Contributing Author N/A

Article Copyright tv-bay limited. All trademarks recognised.
Reproduction of the content strictly prohibited without written consent.

Related Interviews
  • Mac Mini support from Sonnet Technologies at NAB 2019

    Mac Mini support from Sonnet Technologies at NAB 2019

  • GPU acceleration from Sonnet Technologies with Adobe support at NAB 2019

    GPU acceleration from Sonnet Technologies with Adobe support at NAB 2019

  • Be More with Clear from Prime Focus Technologies at NAB 2017

    Be More with Clear from Prime Focus Technologies at NAB 2017

  • Facility Management Software from Xytech at NAB 2017

    Facility Management Software from Xytech at NAB 2017

  • ROOT6 Technology at IBC 2015

    ROOT6 Technology at IBC 2015

  • Telestream Enterprise at NAB 2014

    Telestream Enterprise at NAB 2014

  • Telestream Switch at NAB 2014

    Telestream Switch at NAB 2014

  • Miranda on BroadcastShow LIVE at IBC 2013

    Miranda on BroadcastShow LIVE at IBC 2013

  • Softron Media Services on BroadcastShow LIVE at IBC 2013

    Softron Media Services on BroadcastShow LIVE at IBC 2013

  • Telestream with Wirecast version five at IBC 2013

    Telestream with Wirecast version five at IBC 2013

  • Telestream with Post Producer at IBC 2013

    Telestream with Post Producer at IBC 2013

  • Cinegy: Multiviewer at NAB 2013

    Cinegy: Multiviewer at NAB 2013

  • Root6 at NAB 2012

    Root6 at NAB 2012

  • PlayBox Technology at IBC2011

    PlayBox Technology at IBC2011

  • Mosart at IBC2011

    Mosart at IBC2011

  • JVC GY-HM650 upgrade at NAB 2013

    JVC GY-HM650 upgrade at NAB 2013

  • File Catalyst at NAB 2013

    File Catalyst at NAB 2013


Articles
Behind the Scenes of Wild rose
KitPlus Financed by BFI Film Fund, Wild Rose tells the story of a musician from Glasgow who dreams of becoming a Nashville star. The only thing in the way: her own penchant for crime and violence.
Tags: iss137 | blackmagic design | davinci | ursa mini pro | KitPlus
Contributing Author KitPlus Click to read or download PDF
Canon EOS C300 MkII Camera Review
Andy McKenzie Canon described the EOS C300 Mark II at its launch as 'a game-changer for creative film-making'. What interested me was whether the camera's impressive feature set, compact size and very aggressive price point matched the needs of the video production market.
Tags: iss137 | finepoint | c300 review | canon c300 | Andy McKenzie
Contributing Author Andy McKenzie Click to read or download PDF
Cinegy Channel Playout
David Wright Canis Television & Media is a UK-based specialist broadcast services company, providing its clients as a one-stop shop for everything from production facilities to asset valuations to traffic control. In response to growing demand from its clients, Canis identified a need for channel playout facilities.
Tags: iss137 | cinegy | canis media | David Wright
Contributing Author David Wright Click to read or download PDF
IMF Adoption
Howard Twine The Interoperable Master Format isn’t new. It’s been around for more than six years. Despite this longevity, the broad adoption since the publication of SMPTE 2067 has been pretty slow. This is perhaps more because of the age old mantra “if it ain’t broke don’t fix it,” than the ease with which many could interpret the standard. However, it is safe to say that movie producers blazed a trail in using IMF for original content delivery. Perhaps the key is that those early adopters didn’t have any significant tape based infrastructure that had been modified for file-based working when receiving content. So, many longer established content distributors have the immense resources to create the vast array of versions required to address the ‘version issue.’ This being how do you get the same content to look good on the back of an aeroplane seat headrest or an iPhone in the back of car as well as a good old TV set. Over time these resources have been diminishing and many organisations recognise that they have to adopt workflow automation to survive.
Tags: iss137 | editshare | imf | standards | smpte 2067 | Howard Twine
Contributing Author Howard Twine Click to read or download PDF
NAB 2019 Highlights
Paul MacKenzie The NAB Show in Las Vegas never loses its capacity to surprise. With NHK already transmitting in 8K and the Tokyo Olympics just a year away, this might have been the year that 8K equipment prices descended from the stratosphere to just plain expensive. The main trends at NAB 2019 were an increasing focus on HD-HDR, Media-over-IP and 4K. 8K was pretty low key except for a very promising demo on the Sharp stand: an extremely compact 8K camera at an impressively low price point: $4,000. Shooting at 30 frames per second to an internal card and using a prosumer-style Olympus lens, it looked very much an entry-level product but one with phenomenal potential for any videographer looking to work with very large display screen sizes.
Tags: iss137 | finepoint | nhk | media-over-ip | canon xa50 | xa55 | huddlecam | jvc | gy-hc550 | panasonic aw-ue-150 ptz | samsung | 8k signage | hdr10+ | livetrakl-20 | mediakind | Paul MacKenzie
Contributing Author Paul MacKenzie Click to read or download PDF