Custom Consoles Module-R and MediaWall chosen for Azerbaijan Parliamentary Television

Custom Consoles announces the completion of a project for Azerbaijan Parliamentary Television at the National Assembly in Baku. Commissioned by specialist broadcast systems integrator ProMix, based in the same city, the new installation includes three rectangular Module-R technical control desks and a 3.8 metre wide MediaWall monitor display mount.
"We were very pleased to be selected to work on this very high profile installation,\" says ProMix General Director Gunduz Suleymanov. "Custom Consoles' Module-R and MediaWall have proved highly successful in many of our studio control room projects over the years. Our customers like the desk ergonomics, the robust build quality and the easy access to equipment for routine maintenance. As system integrators, we appreciate the modularity which makes Module-R desks easy to predesign and match to specific control-room dimensions.
"MediaWall is also very popular with customers, allowing freeform attachment of video monitor panels in practically any size as well as auxiliary devices such as loudspeakers and studio clocks. The support frames are very stable and Custom Consoles also has a good understanding of cable ducting both in their desks and in MediaWall."
"All three desks as well as the MediaWall were pre-assembled at our UK factory and then delivered to ProMix who then installed the desks in the parliamentary TV studio control suites and integrated the technical equipment,\" adds Custom Consoles' Sales Manager Gary Fuller.
"Largest of the three desks is a 4.7 metre wide five seat unit incorporating an Allen & Heath audio mixer, Telemetrics robotic camera controller, Ross Carbonite Black video production switcher, Cinegy playout, ingest, CGs and auxiliary engineering facilities. Located in the master control hall, this is equipped with two sloping-front equipment pods, 3 U and 4 U capacity respectively, plus an additional 4 U pod at the producer's seat to hold programme-related documentation. Six computer monitors are mounted on Ergotron adjustable arms behind the main work surface. The desk front is parallel with the MediaWall display."
"Second of the three Module-R designs is a 4 metre wide four-seat control desk for use by two producers and two engineers. Both engineer positions again have a worktop-embedded Telemetrics robotic camera controller and each producer has immediate access to a Ross Carbonite Solo switcher plus an audio mixer."
"The third desk is 3.6 metres wide and configured for use by three media management staff assigned to video editing and archiving. All three desks are constructed from maple-veneered MDF with hard-wearing Arabesque worktop surfaces."
A mix-and-matchable control room furniture range, Custom Consoles' Module-R enables aesthetically attractive long-life desks to be configured in a variety of shapes and dimensions from a selection of high-quality pods, base sections, 19 inch rack housings, worktops, end-panel modules and legs. Coordinated desk pods are available as single-bay sections with up 10 rack unit chassis capacity.Module-R has been tested by FIRA to ensure compliance with current ISO standards. It is supplied with full cable management and internal 19 inch racking, accessible via removable front and rear cover panels. All rear surfaces and pods are completely interchangeable. A full length cable brush enables easy reconfiguration.
MediaWall allows flat-screen monitor displays of practically any width to be constructed from standard horizontal and vertical support elements. It can be used as a fully self-supporting structure or coupled directly to a studio wall. Individual screens can be positioned so that the edges meet exactly to form a continuous horizontal display limited only by the boundary of the monitor panel itself. All wiring is fully concealed and can enter or leave the structure at any desired point. Media Wall is available in any specified element widths.
Custom Consoles Ltd, www.customconsoles.co.uk, is an ISO 9001 certified manufacturer of project-specific and modular broadcast, process-control and security furniture. Its product range includes motorised, manually-adjustable and fixed-height units plus fan-cooled sound-insulated equipment housings. Custom Consoles operates from a 1,200 square metre UK-based production facility equipped with 3D computer-aided-design facilities, computer-controlled cutting machinery and a thermoform press. These resources provide the dual benefits of precise quality control and prompt delivery times, typically 21 days from receipt of order. Custom Consoles' clients include broadcasters, production and post production studios, governmental and corporate organisations in Europe, the Middle East, Asia and Australasia.
www.customconsoles.co.uk