At CABSAT 2013, dynamics specialist Junger Audio will be introducing Middle East customers to M*AP the latest addition to its Award-winning *AP family of audio loudness processors.
In conjunction with its Middle East distributor Qvest Media (Hall 8, Stand E8-10), Junger Audio will demonstrate this ground-breaking processor that combines an audio monitor controller and a loudness measurement device in one unit, thus providing comprehensive quality control and loudness monitoring for anyone working in a production or broadcast environment.
Designed for quality checking surround (5.1) and/or stereo programs, M*AP can be used for live monitoring and also to ensure compliance with todays standards and regulations (ITU 1770/1/2/3, ATSC A85 or EBU R128).
The unit comes with alarm signals that alert the operator when pre-set loudness thresholds are exceeded, and these signals can be delivered by simple GPOs and/or SNMP traps, which carry actual loudness values. Loudness measurements can be performed over a long run or over a fraction of a program, or both. These measurements can be triggered by automation systems via GPIs or via the network - or even manually by buttons of the X*AP remote panel.
Alongside loudness measurements, M*AP also offers functionality for acoustical QA. It has an option for up to eight speaker outputs that allow for monitoring of the audio mix and A/B checking of stereo compatibility of a surround downmix through alternative speakers, as well as via L/R front speakers.
Peter Prs, Managing Director of Junger Audio, says: By incorporating 3G, HD and SD auto detection, M*AP gives users the option of dealing with all 16 channels of SDI embedded audio at the same time. This means that you can listen to one program while permanently logging the loudness of two (5.1 +2 mode) or four (4x2 mode) programs. It is also possible to send further de-embedded programs to M*APs AES outputs to feed a third party instrument for analyzing and/or display.
For no extra cost, the M*APs SDI board acts as an embedder as well and comes with video delay to compensate for any kind of audio delay. This feature is ideal for those looking to maintain lip sync in QA suites or control rooms. M*AP also features a built-in Dolby® Metadata generator and an optional Dolby® decoder that allows users to decode Dolby-E, Dolby-D (AC-3) and Dolby Digital plus (E-AC-3).
Optional Dolby Metadata emulation will be introduced in the second quarter of 2013, giving producers a unit capable of simulating the results of different types of Dolby encoding, and a successor capable of performing many of the tasks previously undertaken by Dolbys DP570 unit.
Junger Audio will also be showing the rest of the processors in its *AP range, including the Award-winning T*AP TV Audio Processor, the D*AP LM4 four-channel Digital Audio Processor and the D*AP LM2 two-channel Digital Audio Processor.
The line-up is completed with Junger Audios Loudness Logger, a powerful tool that offers customers of all Junger Audio levelling processors an easy way to monitor the development of the loudness over time. Using this new software, broadcasters can monitor in real time or by analyzing previously stored loudness log files. This innovation is critical as all broadcasters now need to show precisely how their audio levels are performing in order to comply with new legislation on Loudness.
If you would like more information about these products please visit Junger Audios distributor Qvest Media in Hall 8, Stand E8-10 for a demo.