LOGIC media solutions Integrates Leader LT4611 into IP Demo System

David Kirk

Published: 15 October 2020

LOGIC media solutions Integrates Leader LT4611 into IP Demo System

Broadcast industry solutions provider LOGIC media solutions has integrated a Leader LT4611 video sync and PTP reference generator into a mobile IP demonstration system based at the company's headquarters at Bickenbach, southern Germany. The system will be used to detail the advantages of IP based video and audio systems compared with traditional SDI technology.

"Leader's LT4611 solves a major challenge broadcasters face in providing high-precision SMPTE 2059-2 PTP timing reference signals for the IP and SDI domains which are both repeatable and easily stored,\" says LOGIC's Managing Director Christophe Bingemer. "Precision Time Protocol monitoring is vital when content is migrated from SDI to IP infrastructures. Some SDI-oriented test equipment vendors have tried integrating a PTP generator into their video sync generators. Telco equipment vendors from their side have tried adding analogue black burst reference capabilities to their timing reference generators. The LT4611 operates much more effectively and in both domains. Broadcasters can select the SDI and IP resources they need from a range of options rather than having to invest in features they have either outgrown or do not yet need. We will be promoting this as the preferred test instrument to all our current and existing customers."

Designed for use in broadcast studios, mobile production vehicles, post-production companies and broadcast equipment maintenance facilities, the Leader LT4611 is a signal generator in 1 U full rack size that outputs an analogue video synchronized signal and audio word clock. The LT4611 has a genlock input and can be synchronized with NTSC/PAL black burst or HD tri-level sync signals. The integral genlock function allows local sync to be sourced from incoming video. Options are available enabling sync from GPS, sync from PTP, discrete pattern output, digital audio output and timecode output via 12G-SDI, 3G-SDI, HD-SDI and SD-SDI. Primary and reserve power supply units with automatic switchover are built in.

Three independent analog black burst reference signals are provided, expandable to six. These can also deliver tri-level sync. A 48 kHz word clock output and 48 kHz AES/EBU output are provided to allow audio synchronization.

Standard support for SNMP via Ethernet makes it easy to integrate the LT4611 into a network environment. Alarms are generated with SNMP and displayed on the front panel when errors are detected. As well as providing both a 10 GbE and 1GbE PTP interface, the instrument comes as standard with three independent synchronized analogue black and burst outputs. This overcomes the challenges of requiring both IP and SDI timing references. A stay-in-sync function maintains the phase when GPS reference is lost, plus a slow-lock function to reduce quality-of-service issues that occur when genlock is restored.

All LT4611 features can be managed from the front panel or remotely. Up to 10 preset configurations can be saved within the generator for later recall. The LT4611 can be started with the same settings each time. Logo data and preset data can be written to and recalled from plug-in memory devices via a front-panel USB port.

Dual power supplies are built in to maximize operational security. If an error occurs in one of the power supplies, its status light on the LT4611 front panel changes from green to red. A power supply alert can also be output via SNMP. The LT4611 incorporates a real time clock backed up by a battery so there is no need to reset the clock even when the power is turned off and on.

The instrument is supported by three LT4610-compatible hardware options and four LT4611-specific hardware options. These can be selected to suit current operating environments. Additional options can be purchased when required.

About LOGIC media solutions

Operating from headquarters in Bickenbach and additional premises in Mainz, LOGIC media solutions (www.logicmedia.de) provides a wide range of services for virtually all German broadcasters, telecommunications companies and leading production houses. Its goal is to be a one-stop shop, configuring and installing devices according to customers' wishes. On request, LOGIC media solutions will create a detailed specification of a customer's requirements and supervise the installation or implement the configuration.

About Leader Electronics Corporation

Leader Electronics Corporation (www.leader.co.jp/en) has earned a worldwide reputation for designing and manufacturing highly reliable, practical and powerful test and measurement instruments. Leader products are specified for broadcast, production, post production, research, product development and service applications. Manufacturing quality is built in every step of the way. The Leader product range includes award-winning 3G/HD/SD SDI waveform monitors and rasterizers, all with customizable layouts. Among the available options are 4K/UHD, CIE color chart, HDR measurement, test pattern generation, eye and jitter measurement, closed caption display, IP and 12G/6G-SDI. Leader has helped many customers manage their transition from analog to digital, from SD to HD, from HD to 4K/UHD, from SDR to HDR and from BT.709 to BT.2020 wide color gamut. Now Leader also provides SMPTE ST2022-7 and ST2110 support for the transition from SDI to IP.

Tags

12g audio hdr ip

Related Listings

Related News

Related Articles

Related Videos

© KitPlus (tv-bay limited). All trademarks recognised. Reproduction of this content is strictly prohibited without written consent.