NTP Technology, a Connectivity Partner of Avid Technology, Inc., has chosen NAB 2015 for the broadcast industry debut of its Pro | Mon monitor control for the Avid® Pro Tools® | S6 control surface and other Avid EUCON¢ 3 enabled control surfaces.
"Pro | Mon elevates monitor control to a new level by providing the functionality of both the Avid XMON¢ and Avid Studio Monitor Pro monitor solutions," says NTP Technology Sales Director Mikael Vest. "Pro | Mon adds multiple inputs and outputs that will easy adapt to any Avid Pro Tools | HD, HDX or HD Native S6 based hardware environment. This enables music and post-production facilities to benefit from interfacing to analogue and digital domains with speaker formats from stereo, 5.1 and 7.1 all the way up to 64 channels for Dolby Atmos.
Pro | Mon integrates closely with the NTP Technology DAD AX32 ultra-high-quality analog/digital audio converter and the DAD DX32 router units, allowing both to be managed via EUCON 3 enabled DADman 4.2 control software. The combination provides a versatile input/output platform and switching matrix with up to 48 analogue inputs or outputs, 16 AES/EBU I/O and 64 to 192 MADI I/O on up-to three MADI ports. Also accessible are a 64 channel interface for Avid Pro Tools HD, HDX and HD Native as well as SDI-embedded audio.
Housed in a compact 2U chassis, the AX32 is designed for use in no-compromise audio recording and mixing as well as post-production. Large multi-microphone arrays can be accommodated without the need to transport a second processor. Up to 48 microphone feeds can be connected back to the control room along a single Cat 5 cable via fully transparent and uncompressed IP Ethernet.
The DX32 is a digital audio bridge and router interface designed for applications such as multi-room recording studios, post-production facilities and audio distribution installations. It allows all digital input and output routing to be managed within a single unit or a combination of units. With near zero latency, the DX32 can be used to expand I/O channel count and interface digital components, providing a high quality bridge between AES/EBU, MADI, Avid Pro Tools HDX and the Dante IP audio network.
About NTP Technology
NTP Technology (www.ntp.dk) produces high-reliability audio routing and signal processing systems for major international broadcasters, audio mastering and editing studios. NTP products are integrated into television and radio stations as well as production centres, post production facilities and outside broadcast vehicles. Based in Copenhagen, NTP is part of Dan Technologies Group, one of Europe's leading suppliers of audio, video, transmission products and digital media solutions.