Adder Technology, the high-performance KVM (keyboard, video, mouse) specialist, has been chosen by the world-leading audio console manufacturer Solid State Logic (SSL) to provide an IP-based KVM solution for its Product Demonstration Area (PDA).
Built over two floors, SSLs PDA is a suite of six fully functioning production suites that is used for demonstrations, training sessions, testing and product development, with an additional three workstations that can be accessed from each suite as and when required.
However, as the amount of technology used across the PDA has continued to grow, the manual patching that routes the audio signals between the suites and the workstations grew increasingly complex. SSL recently installed an IP infrastructure across the entire site to remedy this problem, but it still required an IP-based KVM switching and extension solution.
Having previously worked together, SSL enlisted Adder to implement a system that would allow seamless switching and working between the PDAs suites and workstations. After much consideration, SSL chose to use the Adder DDX30 matrix for this.
The solution is made up of one AdderView DDX30 switch, four AdderView DDX computer access modules (CAMs) at the computer and six AdderView DDX USR, which sit at the user end and allow access to the nominated computers via an intuitive interface. This solution was implemented over SSLs existing infrastructure and is flexible enough to integrate with a wide range of computers and USB devices.
By using the AdderView DDX30 matrix, SSL was also able to circumvent the issue it had previously faced in regards to the Mac hardware it uses throughout its PDA. While other competitors solutions were not compatible with Mac, Adder was able to deliver fluid Apple format DVI video with no latency-related issues.
Due to the nature of the work that goes on in our PDA, it was really important to us that we implemented a flexible solution that delivered a high-performance user experience across multiple displays and workstations. We now have a very slick system which was easy to set up and has plenty of scope for us to expand in the future. From the users perspective the picture looks great and the on-screen GUI matrix is very intuitive, said Chris Jowett, SSL.
Jamie Adkin, VP Sales EMEA at Adder Technology, says: This was an exciting and challenging project to be involved with, and we worked closely with SSL to make sure we could deliver a solution that met their specific requirements. By implementing the Adder DDX30 matrix as a solution, we believe weve done just that. SSLs PDA is now fully equipped to be used for a huge variety of production tasks, both today and well into the future.