Studio Technologies Announces New Dante Bridge for Network Interconnection

Date: 10/11/2020
Studio Technologies Announces New Dante Bridge for Network Interconnection

Audio personnel have adopted the Dante® Audio-over-Ethernet (AoE) protocol as a “go to” method of interconnecting devices using standard Ethernet networks. Dante’s excellent audio quality, flexible features, and simple deployment has encouraged broad adoption among equipment manufacturers. Despite these strengths, interoperability between networks can prove challenging. Studio Technologies, manufacturer of high-quality audio, video, and fiber-optic solutions, announces a simple, yet high performance solution with the Model 5482 Dante Bridge. The unit provides a means of “bridging” up to 64 AoE channels between LANs or Dante domains.

“The Model 5482 is a sophisticated, networked audio device that can alleviate common challenges associated with LAN interconnectivity,” says Gordon Kapes, president of Studio Technologies. “In just a few minutes, professionals can ‘link’ independent audio networks, maintaining superior audio quality while supporting a range of operating parameters.”

Each of the Model 5482’s independent interfaces provide three Gigabit Ethernet network ports, allowing support for both switched and redundant Dante operation along with a separate management network connection. Each “side” of a Model 5482 can be independently configured to match the unique demands of an application. The unit allows up to 64 audio channels to pass in each direction with support for up to 24 bits at 44.1, 48, and 96 kHz sampling rates. Sample-rate-conversion (SRC) capability, implemented in high-speed programmable logic, ensures that audio signals with different sampling rates and timing references can be directly interconnected.

The Model 5482 is compliant with the AES67 standard and supports the Dante Domain Manager™ (DDM) software application. Each of the unit’s Dante interfaces can function independently — for example one of the network interfaces can be operated through DDM while the other remains “open.” Each interface can be configured to support AES67 digital audio signals, allowing the Model 5482 to serve as a unique Dante-to-AES67 bridge.

The unit is housed in a rugged yet lightweight enclosure that mounts in one space of a standard 19-inch equipment rack. Its front panel features a user-friendly interface with LED indicator lights, a graphics display, and push-button switches to observe and configure key operating parameters. Operating power can be provided by 100-240 volts, 50/60 Hz, or a source of 10-18 volts DC. If both AC and DC power are connected, then the Model 5482 will be powered by the AC mains source with DC serving as a “hot” standby.

“As with all of our products, the Model 5482 was designed to meet the stringent demands of professional audio applications,” says Kapes. “Users can maintain superior audio performance between different networks, even those with divergent sample rates and independent clocking sources.”



Tags: Studio Technologies | network audio | Dante
Submitted by Nicole Rosen (D. Pagan Communications)
View author's directory page

Related Interviews
  • Studio Technologies at NAB 2014

    Studio Technologies at NAB 2014

  • Studio Technologies at NAB 2012

    Studio Technologies at NAB 2012

  • Bella 22 MK11 Network Audio Monitor from Glensound at IBC 2019

    Bella 22 MK11 Network Audio Monitor from Glensound at IBC 2019

  • Glensound show Beatrice the AES67 Network audio intercom beltpack at IBC 2018

    Glensound show Beatrice the AES67 Network audio intercom beltpack at IBC 2018

  • Glensound Beatrice Dante Intercom at ISE 2019

    Glensound Beatrice Dante Intercom at ISE 2019

  • Glensound Anthens 2 Dante Turntable Pre-Amplifier at ISE 2019

    Glensound Anthens 2 Dante Turntable Pre-Amplifier at ISE 2019

  • SSL Dante AoIP with System T from Solid State Logic at IBC2019

    SSL Dante AoIP with System T from Solid State Logic at IBC2019

  • AES3 to Dante / AES67 converters from Glensound at NAB 2019

    AES3 to Dante / AES67 converters from Glensound at NAB 2019

  • Glensound Dante Intercom System at IBC 2017

    Glensound Dante Intercom System at IBC 2017

  • Glensound Dante at IBC 2014

    Glensound Dante at IBC 2014

  • Virgil OB headphone amplifier from Glensound at NAB 2018

    Virgil OB headphone amplifier from Glensound at NAB 2018

  • 32 Keypanel Intercoms from Clearcom at NAB 2017

    32 Keypanel Intercoms from Clearcom at NAB 2017

  • Live Sports Broadcast Commentator from Glensound at NAB 2017

    Live Sports Broadcast Commentator from Glensound at NAB 2017

  • Glensound at IBC 2016

    Glensound at IBC 2016

  • Glensound at NAB 2016

    Glensound at NAB 2016


Related Shows
  • Enabling live music performances across multiple spaces using NDI & Dante

    Enabling live music performances across multiple spaces using NDI & Dante


Related Articles
  • IP Technology for Broadcast Audio Routing Systems

    IP Technology for Broadcast Audio Routing Systems

  • AoIP in the intercom world

    AoIP in the intercom world

  • Sennheiser Digital 6000 review

    Sennheiser Digital 6000 review

  • Audio

    Audio

  • Remote Production

    Remote Production

  • TV-BAY: Ask the Experts

    TV-BAY: Ask the Experts

  • Advanced Hybrid Optical Cable and Connectors

    Advanced Hybrid Optical Cable and Connectors


News
Rohde and Schwarz Introduces Advanced Dolby Atmos Audio and IMF Packaging Capabilities to CLIPSTER Posted: 14/04/2021
Rohde and amp; Schwarz Introduces Advanced Dolby Atmos Audio and IMF Packaging Capabilities to CLIPSTER

Rohde & Schwarz, a global leader in post-production media technologies has announced the release of the latest version of its R&S®CLIPSTER feature film and episodic TV mastering system. The latest software upgrade (version 6.9.1) includes extended support for Dolby Atmos multi-channel surround sound production technology as well as the latest IMF (ST2067-X) delivery standards.

Tags: Rohde & Schwarz | broadcast media | broadcast | CLIPSTER | Dolby Atmos Audio | IMF capabilities | entertainment | software update | surround sound technology | production media technology | R&S CLIPSTER
Submitted by Manor Marketing
More from this author
Rohde and Schwarz Introduces Scalable Distributed Multiviewer Functionality Posted: 14/04/2021
Rohde and amp; Schwarz Introduces Scalable Distributed Multiviewer Functionality for R and amp;S and reg;PRISMON

Rohde & Schwarz, a global leader in broadcast media technologies has announced the introduction of strategic new IP-related multiviewer functionalities within its R&S®PRISMON broadcast channel monitoring and multiviewer system.

Claimed by the company to be a world’s first in IP workflow multiviewing, the new Scalable Distributed Multiviewer feature offers unprecedented configuration flexibility for users through its ‘any to any’ function. This unique feature, which can be added to existing PRISMON installations, enables any input to any output connectivity through IP proxy networks for up to 36 remote devices.


Tags: Rohde & Schwarz | Multiviewer | broadcast media | broadcast | prismon | scalable | Distributed Multiviewer | Multiviewer feature | Monitoring
Submitted by Manor Marketing
More from this author
NEP Germany moves into air freight containers for production of the current Formula 1 season Posted: 14/04/2021
NEP Germany moves into air freight containers for production of the current Formula 1 season

Producing the Formula 1 for TV is, besides the production challenges as such, a logistical tour de force. Production equipment needs to travel around the world preceding the racing circus and must always be on-site and ready for use at the right time.

Tags: Formula One | container | studio | NEP Germany | Broadcast Solutions
Submitted by Broadcast Solutions
More from this author
Densitron launches new Tactila evaluation kit for touchscreen rotary controls Posted: 14/04/2021
Densitron launches new Tactila evaluation kit for touchscreen rotary controls

Densitron, the global leader in innovative Human Machine Interaction (HMI) and display technology, has addressed the continuing strong demand for tactile controls to be used in conjunction with touchscreens by launching a versatile new evaluation kit. Incorporating three tactile rotary knobs that are already bonded, Tactila features a high-resolution 8” touchscreen as well as powerful processing that utilises ARM and Linux BSP technologies.

Tags: Densitron | Tactila | Broadcast | Rotary Knobs | Tactile Controls | Rotary Controls
Submitted by Page Melia PR
More from this author
Leader Introduces Video Primers on SMPTE ST 2110 Posted: 14/04/2021
Leader Introduces Video Primers on SMPTE ST 2110

Leader Electronics announces new additions to its range of training resources with the release of three video primers explaining the SMPTE ST 2110 Professional Media Over Managed IP Networks suite of standards:

Video primer: An Introduction to ST 2110-20 (6 minutes).

Video primer: An Introduction to SMPTE ST 2110-10 System Timing (22 minutes).

Video primer: SMPTE ST 2110 Professional Media Over IP (5 minutes).


Tags: Leader Instruments | video test equipment | audio test equipment | video waveform monitors | 12G waveform monitors | 12G video analyzers | IP video analysers | video noise meters | HDR test equipment | true-hybrid test equipment | Hi-Vision test equipment | surround
Submitted by Stylus Media Communications
More from this author
ACCESS Europe partners with leading music service Stingray to deliver greater content choice and entertainment to car users Posted: 14/04/2021
ACCESS Europe partners with leading music service Stingray to deliver greater content choice and entertainment to car users

ACCESS Europe GmbH today announced that it has partnered with Stingray Group Inc. (TSX: RAY.A; RAY.B), a leading music, media and technology company, to bring streamed music services to the car for the US and Canadian markets initially.

Tags: OTT | Streaming | Stingray | Automotive | Music | AppStore | SVOD | Audio
Submitted by Staff
More from this author
Maxon Announces Redshift for macOS Including Native Support for M1-Powered Macs Posted: 13/04/2021
Maxon Announces Redshift for macOS Including Native Support for M1-Powered Macs

Maxon announced the immediate availability of Redshift for macOS including support for M1-powered Macs as well as Apple’s Metal Graphics API. Redshift, the award-winning, production-ready renderer, offers a rich feature set including ray switches, flexible shading networks, motion blur, AOVs, deep output, layered EXR and much more.

Tags: Maxon | Redshift | macOS | production rendering | VFX rendering
Submitted by Zazil Media Group
More from this author
Maxon Announces Cinema 4D S24 Posted: 13/04/2021
Maxon Announces Cinema 4D S24

The latest subscription-only release of Maxon’s 3D application allows users to easily browse and obtain models, materials and other assets, and to intuitively place them within the scene. The release also includes key workflow enhancements and a sneak peek at continued progress on the Scene Nodes and Scene Manager interfaces to the new core.

Tags: Maxon | Cinema 4D | C4D | 3D design | product updates
Submitted by Zazil Media Group
More from this author
Maxon Unveils a New Corporate Identity Posted: 13/04/2021
Maxon Unveils a New Corporate Identity

After more than 20 years, Maxon has unveiled a new corporate identity. The move follows the completed unification of Maxon global in 2018, the acquisition of Redshift in 2019 and the merger with Red Giant in 2020. Senior Brand Manager Leo Hageman designed the logo under the direction of Maxon’s executive team.

Tags: Maxon | Logo | Animated Logos | Redshift | Red Giant
Submitted by Zazil Media Group
More from this author
Moves by Maxon Update Offers Streamlined Workflow Posted: 13/04/2021
Moves by Maxon Update Offers Streamlined Workflow

Maxon, the developers of professional software solutions for motion designers and visual effects artists, is pleased to announce the release of an update to Moves by Maxon for iOS devices. Moves by Maxon capitalizes on the emerging technology of Apple's AR-Toolkit, which enables users to capture facial motion and whole body movement; enabling artists to bring motion sequences into Cinema 4D with limited technical effort. Moves by Maxon was released in early 2020 and has become quite popular among Cinema 4D users. In this latest updated release several optimizations have been implemented to make the app more stable and user-friendly. Most notably, Moves by Maxon now includes simplified connectivity to Cinema 4D S24 via automatic network discovery, removing the previous need to scan a QR Code image or manually configure the IP address of the machine running C4D.

Tags: Maxon | Moves by Maxon | Cinema 4D | Animation | VFX
Submitted by Zazil Media Group
More from this author
GOL TV Leverages Grass Valley End-to-End Live Production Workflow for Studios and Mobile Units Upgrade in Multimillion Dollar Deal Posted: 13/04/2021
GOL TV Leverages Grass Valley End-to-End Live Production Workflow for Studios and Mobile Units Upgrade in Multimillion Dollar Deal

Grass Valley announces that a suite of its live production solutions are central to GOL TV’s newly upgraded mobile fleet and studios. In a large and complex multimillion dollar deal, the Tenfield-owned bilingual soccer channel has selected Grass Valley cameras, switchers, replay and highlights and IP routing and infrastructure – all fully integrated with third-party equipment – to provide an end-to-end workflow that will support live sporting events, live musical shows and news productions. This system upgrade equips GOL TV to strengthen its position in live production for LATAM with futureproofed capability, including IP and 4K UHD HDR.

Tags: grass valley | gol tv
Submitted by Staff
More from this author
Victory Church Engages the World with Pliant Technologies MicroCom XR Posted: 13/04/2021
Victory Church Engages the World with Pliant Technologies MicroCom XR

For Victory Church, entering the live-stream world was something that they aimed to achieve within the next few years, but when the pandemic struck, it was a shift that they needed to make within a few weeks. With a limited budget and requirements for wireless capabilities, Pliant Technologies’ MicroCom XR digital wireless intercom system was the right solution for Victory Church. With MicroCom XR, production staff and volunteers can deploy a reliable solution for clear communication, helping productions—both in-person and live-streamed—go on without a glitch.

Tags: Pliant Technologies | MicroCom XR | intercom solutions
Submitted by D. Pagan Communications
More from this author
TSL Products Proves Reliable for Saudi Broadcasting Authority Posted: 13/04/2021
TSL Products Proves Reliable for Saudi Broadcasting Authority

GENTEC, a leading contractor for telecommunications, electronics and computer projects, has proven its capability by successfully completing projects across Saudi Arabia, and has become a trusted systems integrator of TSL Products. When the integrator was recently tasked with a first-of-its-kind outside broadcast project at Saudi Broadcasting Authority (SBA), they knew that TSL’s audio monitoring and broadcast control solutions would be up to the challenge.

Tags: TSL Products | audio monitoring | broadcast control
Submitted by D. Pagan Communications
More from this author
New TVU Remote Commentator Offers Real-Time, Broadcast-Quality Audio Commentary for Live Productions over the Internet Posted: 13/04/2021
New TVU Remote Commentator Offers Real-Time, Broadcast-Quality Audio Commentary for Live Productions over the Internet

TVU Networks today announced TVU Remote Commentator, a cloud-based solution that allows sports producers and event organizers to add synchronized, real-time audio commentary from any location using a public internet connection. Even when the event and commentators are in different parts of the world, TVU Remote Commentator streamlines digital productions and delivers broadcast-quality audio for live productions.

Tags: TVU | cloud production | remote production | sports production
Submitted by Pipeline Communications
More from this author
ELEMENTS Discuss Best Practices for Remote Production Workflows and Latest Updates in the Ecosystem Posted: 13/04/2021
ELEMENTS Discuss Best Practices for Remote Production Workflows and Latest Updates in the Ecosystem

ELEMENTS, provider of innovative, high-performance media storage and server systems for the post-production and broadcast industry, is offering free, dynamic web sessions 27-29 April 2021 to discuss remote editing of the future, as well as recent updates.


Tags: ELEMENTS | Media Storage | Server Systems | post production | broadcast | remote production | storage | storage ecosystem | automation workflows | Qualification Programme | storage solutions | editing
Submitted by Manor Marketing
More from this author
Pages:   [1] 2 3 4 5 6 7 > >>